Chevy High Performance
Click here to find out more!

stock chevy tbi 350 trying to get power

  
Chevy High Performance
Item Posts    Sort Order

stock chevy tbi 350 trying to get power

 
jstyle247 jstyle247
New User | Posts: 2 | Joined: 06/12
Posted: 06/19/12
09:06 AM

I have a stock tbi 350 out of a 1988 k5 blazer 119,000 miles motor runs. Im planning on putting it in a 1988 oldsmobile cutlass i have engine mounts in car already what can i do to motor to make it have pep like hot rod around 320hp decent torque dont have big budget around 1000.00 to 1500.00 Thanks in advance for any suggestions  

dond1965 dond1965
Enthusiast | Posts: 294 | Joined: 12/13
Posted: 12/03/13
09:10 PM

sorry for the wait, but im new here! how about the edelbrock intake manifold #3704, trans dapt open spacer #2635. some 3/4 length headers,high flow cat/cons and mufflers.maybe comp cams hyd. cam #08-305-8. 220-230 degree duration at 50, 0.510 inch valve lift, 114 degree LSA, rated from 1,800-5,800 rpm. sorry if im too late!  

dond1965 dond1965
Enthusiast | Posts: 294 | Joined: 12/13
Posted: 12/07/13
05:53 PM

p.s. check out the CFM TECHNOLOGIES web site... good luck to you