|
|
Item Posts
Sort Order
|
|
|
58 chevy trans swap?
|
|
Posted: 09/25/09
10:26 PM
|
|
Hi, I am new to the Chevy Forum. Question for the experts. I got a 2 door 1958 Bel-air w/ 350 TH350 and want to swap to an overdrive 700r4 or 200r4. Has anyone done this on a 1958 Chevy? I hear the 200r4 is the same length as a th350, so is it a direct bolt on? Can you use the same crossmember too? How about rear ends, I want to swap in a posi, which rearends can bolt into a '58 if any? Thanks. Jeff
|
|
|
|
zman123
User
| Posts: 144
| Joined: 06/08
Posted: 09/26/09
08:45 AM
|
|
The 700R4 is a very good trans, I put one in my 69 Malibu. The original crossmember just had to be moved back 2" and the driveline had to be shortned, not a big deal. The 1,2 gears are lower than in the 350 so acceleration will improve as well as gas mileage, my 350 in the Malibu is getting 20+ mpg (hiway) You can put a posi differential in your existing rear end, no housing change necessary unless you REALLY want to.
|
|
|
|
Dave632
User
| Posts: 111
| Joined: 07/08
Posted: 09/26/09
03:26 PM
|
|
The stock rears in 58 chevys were OK. I raced one quite a bit with a 4.56 posi in it, way back when, and it never failed. Posi's did come stock in some 58s so they are available.
|
|
|
|
|
|
|
|
|