383 stroker for a 95 chevy pickup want to know power and 1/4 mile

-76cc heads 2.02/1.60 valves speedpro .30 over dome pistons 292compcam 501/501 lift steel 3.75 crankshaft performer rpm intake with 750 carb  

Stock ports,whats your compression ratio,was the block decked,heads shaved,vac secondary carb or double pumper,type of ignition? Lots of info needed to make a good guesstimate  

+1  

10:1 compression heads ported heads shaved 750 double pumber msd billet pro  

425hp 450+ tq i would guess if the heads have port work. what type of rockers 1.5 or 1.6 rollers or stamped?  

you should be making about 430-460hp and 430-460 depending on a how good your heads have been ported and a couple of other things. sounds alot like my engine(.30 over,750dp,holly dominator,10:1 compression,.490-.490,iron heads, mine is not stroked tho.)  

your truck is heavy so i would say in the 12s with good hook up and slicks.  

im still debating on eaither 1.5 or 1.6 rockers what do you all think  

what is ur car running. is it manual or automatic  

I would GUESS about 400-450 depending on how well the port work is done and how well the engine is assembled  

1.6 will make the cam seem larger so why not. i run them and have had no probs  

1.6s will add bout .030 more lift and 3-4 degrees more duration. Are you using an auto or manaul?  

automatic 350 with 3000 stall 4:11 gears  

how much of a difference would it be with a pair of aluminum edelbrock heads power and 1/4 times  

Again it depends on how well the port work is done on your heads. I like Brodix heads over Edelbrock heads. If you would upgrade to a hyd.roller cam along with the heads then I would GUESS about 440hp-490hp