|
|
Item Posts
Sort Order
|
|
|
350 Chevy Crate Engine 360 HP!!!
|
|
Posted: 09/18/09 04:05 PM
|
|
This Chevy 350 crate engine would be EXCELLENT for a Street/Strip car, Street Rod, or Pickup Truck. With 360HP @ 5500rpm and 375ft lbs of torque @ 4500rpm this engine has a rough idle and will run on leaded or unleaded 89 Octane pump fuel. The included intake manifold comes with a square bore carb flange for use with a Holley or Edelbrock carburetor (not included).
The balanced rotating assembly ( includes crankshaft, pistons, rings, connecting rods, rod bearings, and balancer) featured in this engine:
3.484" stroke crank 5.7" forged big beam rods with ARP rod bolts 9 to 1 compression hypereutectic flat top pistons More special features of this engine include:
Seasoned 4-bolt main block New Hydraulic flat tappet cam with .480" valve lift 76cc heads with 2.02"Int/1.600"Exh swirl polished stainless valves with undercut stems for better flow Hardened exhaust seats for use with both leaded or unleaded fuels New 1.250" High performance springs set up to match cam New High temperature valve seals New Spiral-type valve guides New Screw-in rocker studs with guide plates New Steel rocker arms with balls and nuts New Hardened push rods New Perfect Circle rings New Double row timing set New High volume oil pump with welded big pickup screen and steel drive shaft and steel guide New Revolutionary 1-pc design molded rubber oil pan gasket with load limiters to prevent over-tightening and higher temperature resistance than standard cork-rubber gaskets New Brass expansion plugs
Let me know if you have any questions or are interested in this engine I need it gone!!!! A steal at $3000
Thanks Carl
|
|
|
|
|
|
|
|
|