I remember reading an article in one of the major car magazines on how to install GM's Ram Jet 350 crate motor.

I can't remember which magazine or how long ago it appeared. I am getting ready to drop the Ram Jet into a '68 and wanted to refresh my memory. Any help would be appreciated. Thanks!

I just started my ram jet 350 crate motor today. I actually bought it 3 years ago. You know how slow hot rod project can go. The connections on the wiring harness is all labled. It was easy. The only problem was that there are 4 wires that are bunched together that are not labled. However, I found some information on a website for Gilbert Chevrolet which was very useful. Two of the wires were for a tachometer. The other wires was a hot wire straight to the battery, and another hot wire to s switched source for the fuel pump. Check out that web site for more help. They also have a bunch of good accessories for that motor that you will need. Good luck
BubbaGump