|
Num Posts
Sort Order
|
Chop-chop
New User
| Posts: 39
| Joined: 11/04
Posted: 02/03/06
08:39 PM
|
|
What would be a good cam for a 454 with about 9.5 compression to make power in the 1800-6200 range? I'd like a choppy idle but I'll settle for power over sound.
|
DINOSOR57
New User
| Posts: 7
| Joined: 02/06
Posted: 02/09/06
04:35 PM
|
|
BEST TO CHECK WITH A CAM MANUFACTURER AND FOLLOW THEIR RECOMMENDATIONS. I HAVE A .030 OVER 454 WITH MERLIN IRON HEADS IN A 65 BISCAYNE. LIFT IS .590 USING SOLIDS AND IT SOUNDS GREAT, RUNS GREAT, VIBRATES THE FRONT BUMPER AT IDLE. RIGHT OFF I CAN'T REMEMBER THE DURATION OR LOBE C/L SPECS BUT I COULD FIND IT AND GET BACK TO YOU.
|
|
|