1967 c10 center drag link - Chevy Forums at Chevy High Performance Magazine Chevy High Performance

1967 c10 center drag link

  
User Name:
Password:
Join FREE Now!
Forgot Password?
Forgot User Name?
Remember Me
Get Adobe Flash player
Home | Active Posts | Search | Register | Terms | FAQs
Rss
Item Posts    Sort Order

1967 c10 center drag link

 
bandet1967 bandet1967
New User | Posts: 2 | Joined: 07/08
Posted: 07/30/08
02:19 PM

I was wondering if any body knows if they used the same center drag link in 1967-1972 chevy c10 1/2tons?  

 
mpayne mpayne
Administrator | Posts: 632 | Joined: 10/07
Posted: 10/03/08
09:02 AM

Does anyone have any answers to this post.  

 
sinned4me sinned4me
New User | Posts: 2 | Joined: 06/09
Posted: 06/10/09
08:35 PM

center links are same as follows
67-69 or 70 power steering may make a difference.
71-72 same
73-87 all the same
you can have the taper reamed out to match your setup by a machine shop but there will be very little material left.( in my opinion UNSAFE ). I am in the same position as you as I am using 77 spindles, BJ, TRE, and 1.25" rotors. I did not pull the center link and now the truck I pulled parts from is gone. Pitman arm and Idler arms should all have the same taper/bore.  

 

Chevrolet Corvette Research
Chevrolet Corvette Find new Chevrolet Corvette information as well as review photos, specs and more. Check the available rebates for the Corvette, which will help you save money on your next new car purchase. It is available in the following bodystyles: Coupes, Convertibles. The Chevrolet Malibu and the Chevrolet Impala are other vehicles that might interest you.