|
Num Posts
Sort Order
|
tait
New User
| Posts: 1
| Joined: 07/07
Posted: 07/18/07
04:17 PM
|
|
first rebuild need some info on the proper bearing gap for the crank shaft journals and rod bearings
|
CLYDE1LS7
New User
| Posts: 43
| Joined: 07/07
Posted: 07/19/07
08:31 AM
|
|
For a stock rebuild on a chev V8 1.5-3 thousanths.a good set will b at the 2-2.5 dead-on margin.These tolerances are for stock only.Pending rpm range racing engines require a bit more.
|
|
|